Onze producten
IMC-121FB
Mini Type Ethernet to fiber media converter with 2x10/100Base-T(X) and 1x100Base-FX
RMC-1000
Rack-mount Ethernet to fiber media converter Chassis with 18 slots
RMC-121FB
Card type Ethernet to fiber media converter with 2x10/100Base-T(X) and 1x100Base-FX
RMC-111FB
Card type Ethernet to fiber media converter with 1x10/100Base-T(X) and 1x100Base-FX
RMC-111PB
Card type Ethernet to fiber media converter with 1x10/100Base-T(X) and 1x100Base-FX, SFP socket
RGMC-111GPB
Card type Ethernet to fiber media converter with 1x100/1000Base-T(X) to 1x100/1000Base-X, SFP socket
IGMC-1011GF
Slim Type 1x 100TX (RJ-45) to 1x 100FX SFP Media Convertor
IGMC-1011GP
Slim Type 1x 1000TX (RJ-45) to 1x 1000LX (Single Mode / SC) Gigabit Media Convertor
IGMC-111GPB
Slim Type Gigabit Ethernet to fiber media converter with 1x100/1000Base-T(X) and 1x100/1000Base-X, SFP socket
ISC-1112/ISC-1112-I
RS-232 to RS-422/485 Serial Media Converter with Isolation
IGPMC-111GP
Main features
- Support 1 port 10/100/1000Base-T(X) P.S.E. auto-negotiation and auto-MDI/MDI-X copper port
- Support 1 port 100/1000Base-X SFP fiber port
- P.S.E. fully compliant with IEEE802.3at standard, provide up to 30 Watts
- Support Jumbo Frame up to 9K Bytes
- Support LFP (Link Fault Pass-through) function
- Relay output to carry capacity of 1A at 24 VDC for warning system
- Provided DIP-Switch to setting function
- Rigid IP-30 housing design
- DIN-Rail and wall mounting enabled
Overview
The IGPMC-111GP is a cost-effective solution for the conversion interface between 10/100/1000Base-T(X) and 100/1000Base-X SFP socket; it allows you to extend communication distance by optical fiber. IGPMC-111GP supports MDI/MDIX auto detection, so you don’t need to use crossover wires. IGPMC-111GP also support Power over Ethernet, a system to transmit electrical power up to 30 watts, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each IGPMC-111GP has 1x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) port to provide power in a PoE setup. The IGPMC-111GP also supports the LFP (Link Fault Pass-through) feature. When one side of the link fails, the other side continues transmitting packets, and waiting for a response that never arrives from the disconnected side. Use the DIP-Switch to enable the LFP function, then IGPMC-111GP will force the link to shut down as soon as noticed that the other link has failed, giving the application software a chance to react to the situation. The IGPMC-111GP with wide operating temperature range from -40 ~ 75°C and accepts a wide voltage range from dual 50~57 VDC power inputs, so it is suitable for harsh operating environments. Therefore, the IGPMC-111GP is reliable media converter with PoE capability and can satisfy most demand of operating environment.
Specifications
ORing Media Converter Model | IGPMC-111GP |
Physical Ports | |
10/100/1000 Base-T(X) P.S.E. Port in RJ45 Auto MDI/MDIX | 1 |
100/1000Base-X SFP port | 1 |
Technology | |
Ethernet Standards | IEEE 802.3i for 10Base-TIEEE 802.3u for 100Base-TX and 100Base-FXIEEE 802.3ab for 1000Base-TIEEE 802.3z for 1000Base-XIEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.) |
Jumbo Frame | 9K Bytes (1G mode only) |
LED Indicators | |
Power / Ready Indicator | Green: Power LED x 2 |
LFP statue indicator | Amber LED ? (ON) LFP function fail / (OFF) LFP function disable |
100/1000Base-X SFP Port Indicator | Green for port Link/Act |
10/100/1000Base-T(X) Port Duplex Mode Indicator | Green LED ? (ON) Full-duplex mode / (OFF) Half-Duplex mode |
10/100/1000Base-T(X) RJ45 port Indicator | Green for Link/ActDual color LED for speed ? Green for 1000Mbps, Amber for 100Mbps, Off-light for 10Mbps |
Fault Indicator (Fault) | Amber: Indicate unexpected event occurred |
PoE indicator | Green: Power is supplied over Ethernet cable. |
Fault Contact | |
Relay | Relay output to carry capacity of 1A at 24 VDC |
Power | |
Input Power | Dual 50 ~ 57 VDC voltage power inputs in 4-pin terminal block |
Power Consumption (Typ.) | 4Watts |
Overload Current Protection | Present |
Reverse Polarity Protection | Present |
Physical Characteristics | |
Enclosure | IP-30 |
Dimensions (W x D x H) | 40 (W) x70 (D) x 95 (H) mm |
Weight (g) | 291g |
Environmental | |
Storage Temperature | -40 to 85°C (-40 to 185°F) |
Operating Temperature | -40 to 75°C (40 to 167°F) |
Operating Humidity | 5% to 95% Non-condensing |
Regulatory Approvals | |
EMI | FCC Part 15, CISPR (EN55022) class A |
EMS | EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 |
Shock | IEC60068-2-27 |
Free Fall | IEC60068-2-32 |
Vibration | IEC60068-2-6 |
Safety | EN60950-1 |
Warranty | 5 years |
- Home
- Product Catalog
- Industrial Networking
- Media Converter