Gigabit managed redundant ring PoE Ethernet switch with 22x10/100/1000Base-T(X) IEEE802.3at P.S.E. ports and 2xGigabit combo IEEE802.3at P.S.E. ports and 2x100/1000Base-X SFP ports
Main features
- Support O-Ring (recovery time < 30ms over 250 units of connection) and MSTP(RSTP/STP compatible) for Ethernet Redundancy
- Open-Ring support the other vendor’s ring technology in open architecture
- O-Chain allow multiple redundant network rings
- Support standard IEC 62439-2 MRP (Media Redundancy Protocol) function
- 24 port P.S.E. fully compliant with IEEE802.3at standard, provide up to 30 Watts per port
- Support PoE scheduled configuration and PoE auto-ping check function
- Support IPV6 new internet protocol version
- Support Modbus TCP protocol
- Support IEEE 802.3az Energy-Efficient Ethernet technology
- Provided HTTPS/SSH protocol to enhance network security
- Support SMTP client
- Support IP-based bandwidth management
- Support application-based QoS management
- Support Device Binding security function
- Support DOS/DDOS auto prevention
- IGMP v2/v3 (IGMP snooping support) for filtering multicast traffic
- Support SNMP v1/v2c/v3 & RMON & 802.1Q VLAN Network Management
- Support ACL, TACACS+ and 802.1x User Authentication for security
- Supports 9.6K Bytes Jumbo Frame
- SFP socket support DDM function (Port 25~26 only)
- Multiple notification for warning of unexpected event
- Web-based ,Telnet, Console (CLI), and Windows utility (Open-Vision) configuration
- Support LLDP Protocol
- 19 inches rack mountable design
Overview
RGPS-92222GCP-NP series are Gigabit managed redundant ring PoE Ethernet switch with 22x10/100/1000Base-T(X) IEEE802.3at P.S.E. ports and 2xGigabit combo IEEE802.3at P.S.E. ports and 2x100/1000Base-X SFP ports. These switches support Ethernet Redundancy protocol, O-Ring (recovery time < 30ms over 250 units of connection) and MSTP (RSTP/STP compatible) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. RGPS-92222GCP-NP series also support Power over Ethernet, a system to transmit electrical power up to 30 watts, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each RGPS-92222GCP-NP switch has (22+2) x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE connection. RGPS-92222GCP-NP series can also be managed centralized and convenient by Open-Vision, Except the Web-based interface, Telnet and console (CLI) configuration. Therefore, the switch is one of the most reliable choice for highly-managed and Fiber PoE Ethernet application.
Specifications
| ORing Switch Model | RGPS-92222GCP-NP-LP | RGPS-92222GCP-NP-P | RGPS-92222GCP-NP |
| Physical Ports | |
| 10/100/1000Base-T(X) with P.S.E. Ports in RJ45 AutoMDI/MDIX | 22 |
| Gigabit Combo port with 10/100/1000Base-T(X)P.S.E.and 100/1000Base-X SFP ports | 2 |
| 100/1000Base-X with SFP port | 2 |
| Technology | |
| Ethernet Standards | IEEE 802.3 for 10Base-TIEEE 802.3u for 100Base-TX and 100Base-FXIEEE 802.3ab for 1000Base-TIEEE 802.z for 1000Base-XIEEE 802.3x for Flow controlIEEE 802.3ad for LACP (Link Aggregation Control Protocol )IEEE 802.1p for COS (Class of Service)IEEE 802.1Q for VLAN TaggingIEEE 802.1w for RSTP (Rapid Spanning Tree Protocol)IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol)IEEE 802.1x for AuthenticationIEEE 802.1AB for LLDP (Link Layer Discovery Protocol)IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.)RGPS-92222GCP-NP-LP : Total power budget is 320Watts with maximumRGPS-92222GCP-NP-P : Total power budget is 720Watts with maximumRGPS-92222GCP-NP : Total power budget is 720Watts and based-on external power supply spec |
| MAC Table | 8K |
| Priority Queues | 8 |
| Processing | Store-and-Forward |
| Switch Properties | Switching latency: 7 usSwitching bandwidth: 52GbpsMax. Number of Available VLANs: 4095VLAN ID Range : VID 1 to 4094IGMP multicast groups: 256 for each VLANPort rate limiting: User Define |
| Jumbo frame | Up to 9.6K Bytes |
| Security Features | Device Binding security featureEnable/disable ports, MAC based port securityPort based network access control (802.1x)Single 802.1x and Multiple 802.1xMAC-based authenticationQoS assignmentGuest VLANMAC address limitTACACS+VLAN (802.1Q ) to segregate and secure network trafficRadius centralized password managementSNMPv3 encrypted authentication and access securityHttps / SSH enhance network securityWeb and CLI authentication and authorizationAuthorization (15 levels)IP source guard |
| Software Features | IEEE 802.1D Bridge, auto MAC address learning/aging and MAC address (static)Multiple Registration Protocol (MRP)MSTP (RSTP/STP compatible)Redundant Ring (O-Ring) with recovery time less than 30ms over 250 unitsTOS/Diffserv supportedQuality of Service (802.1p) for real-time trafficVLAN (802.1Q) with VLAN taggingIGMP v2/v3 SnoopingIP-based bandwidth managementApplication-based QoS managementDOS/DDOS auto preventionPort configuration, status, statistics, monitoring, securityDHCP Server/ClientDHCP RelayModbus TCPDNS client proxySMTP ClientNTP server |
| Network Redundancy | O-RingOpen-RingO-ChainMRPMSTP (RSTP/STP compatible) |
| RS-232 Serial Console Port | RS-232 in DB-9 connector with console cable. 115200bps, 8, N, 1 |
| LED Indicators | |
| Power indicator (PWR) | Green : Power indicator |
| Ring master indicator (R.M.) | Green : Indicates that the system is operating in O-Ring Master mode |
| O-Ring Indicator (Ring) | Green : Indicates that the system operating in O-Ring modeGreen Blinking : Indicates that the Ring is broken |
| Fault Indicator (Fault) | Amber : Indicate unexpected event occurred |
| 10/100/1000Base-T(X) RJ45 Port Indicator | Dual color LED for Speed/Link/Act indicator ~Green : 1000Mbps Link/ActAmber : 10/100Mbps Link/Act |
| 100/1000Base-X SFP Port Indicator | Green for port Link/Act. |
| PoE Indicator | Green : PoE enabled LED x 24 |
| Fault contact | |
| Relay | None |
| Power | |
| Power Input | 100~240VAC with power socket | 50 ~ 57VDC with terminal block |
| Power supply | 450 Watts power supply included(320W power budget) | 1000 Watts power supply included(720W power budget) | Power supply not include |
| Power consumption (Typ.) | 37 Watts (P.D. not included) | 37 Watts (P.D. not included) | 17 Watts (P.D. not included) |
| Overload Current Protection | Present |
| Reverse Polarity Protection | Not Present |
| Physical Characteristics | |
| Enclosure | 19 inches rack-mountable |
| Dimensions (W x D x H) | 431 (W) x 342 (D) x 44 (H) mm (16.97 x 13.47 x 1.73 inch) |
| Weight (g) | 5000 g | 5730 g | 3982 g |
| Environmental | |
| Storage Temperature | -40 to 85°C (-40 to 185°F) |
| Operating Temperature | -40 to 60°C (-40 to 140°F ) |
| Operating Humidity | 5% to 95% Non-condensing |
| Regulatory Approvals | |
| EMI | FCC Part 15, CISPR (EN55022) class A |
| EMS | IEC61000-4-2 (ESD), IEC61000-4-3 (RS), IEC61000-4-4 (EFT), IEC61000-4-5 (Surge), IEC61000-4-6 (CS), IEC61000-4-8, IEC61000-4-11 |
| Shock | IEC60068-2-27 |
| Free Fall | IEC60068-2-32 |
| Vibration | IEC60068-2-6 |
| Safety | EN60950-1 |
| Warranty | 5 years |
